Schemc
Cnc 6.0KW ER32 square air-cooled spindle motor with flange 220v 18000rpm 300HZ is used for CNC router.
Cnc 6.0KW ER32 square air-cooled spindle motor with flange 220v 18000rpm 300HZ is used for CNC router.
Regular price
$1,173.40 USD
Regular price
$0.00 USD
Sale price
$1,173.40 USD
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
Product Description
Name :STF60-103-6.0-ER32
Speed regulation mode: through the three-phase output inverter to change the spindle speed, adjust the inverter frequency.
Cooling method: Air cooling
Power port: Connects to the black box. The air connectors are identified as "1", "2", "3", "4", "5" and "GND". 1, 2, and 3 are
connected to the inverters (U, V, and W) respectively, while GND is connected to the inverter ground.
(Pay attention! Our spindle "4" is connected to GND to ensure personal safety!! !).
Power :6.0kw (1HP=0.735w)
Voltage :380 v
Current :12.8A
Frequency: 0-300 Hz
Speed: 0-18000 rpm
Jump close: less than 0.01mm
Bearing type :2*7008C, 2*7002C(4 ball bearings)
Chuck :ER32
Lubrication of grease
Main Uses: Engraving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metal, but also can carve gold, silver, copper, aluminum, lead and other soft metal surface. Please note that this is a woodworking spindle and can only be used for woodworking and aluminum products, not steel products. If you need steel, please check the metal spindle, thank you!
Speed regulation mode: through the three-phase output inverter to change the spindle speed, adjust the inverter frequency.
Cooling method: Air cooling
Power port: Connects to the black box. The air connectors are identified as "1", "2", "3", "4", "5" and "GND". 1, 2, and 3 are
connected to the inverters (U, V, and W) respectively, while GND is connected to the inverter ground.
(Pay attention! Our spindle "4" is connected to GND to ensure personal safety!! !).
Power :6.0kw (1HP=0.735w)
Voltage :380 v
Current :12.8A
Frequency: 0-300 Hz
Speed: 0-18000 rpm
Jump close: less than 0.01mm
Bearing type :2*7008C, 2*7002C(4 ball bearings)
Chuck :ER32
Lubrication of grease
Main Uses: Engraving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metal, but also can carve gold, silver, copper, aluminum, lead and other soft metal surface. Please note that this is a woodworking spindle and can only be used for woodworking and aluminum products, not steel products. If you need steel, please check the metal spindle, thank you!
●The working environment temperature of the spindle is usually -10~40.
●Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
●Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular joint bearings can extend the life of the spindle.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. Bearings are resistant to high temperature and low heat
3. The ball bearing has low friction, low noise and long service life.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. Bearings are resistant to high temperature and low heat
3. The ball bearing has low friction, low noise and long service life.
