Schemc
Gigabit Surg POE Protector 10kA Signal 5V/48V Ethernet10/100/1000Mbps RJ45 35mm DIN rail CAT6-6A Network Surge Arresters
Gigabit Surg POE Protector 10kA Signal 5V/48V Ethernet10/100/1000Mbps RJ45 35mm DIN rail CAT6-6A Network Surge Arresters
Couldn't load pickup availability
Technical Data
| Type |
BS RJ45 G48(A) |
| Nominal voltage [UN] |
48V |
| Rated voltage (max. continuous d.c. voltage) [Uc] |
48V |
| Rated voltage (max. continuous a.c. voltage) [Uc] |
34V |
| Max. continuous d.c. voltage (pair-pair POE) [Uc] |
57V |
| Nominal current [IL] |
1A |
| Lightning impulse current (10/350) (L-PG) [Iimp] |
0.5kA |
| Nominal discharge current (8/20) (L-PG) [In] |
2.5kA |
| Total nominal discharge current (8/20) (L-PG) [In] |
10kA |
| Voltage protection level at In (L-L) [Up] |
≤ 190V |
| Voltage protection level at In (L-PG) [Up] |
≤ 600V |
| Voltage protection level at In (L-L POE) [Up] |
≤ 600V |
| Warranty |
3 years |
| Insertion loss at 250MHz |
≤ 2dB |
| Capacitance (L-L) [C] |
≤ 165pF |
| Capacitance (L-PG) [C] |
≤ 255pF |
| Max. data transmission rates [Vs] |
> 1000Mbits/s |
| Operating temperature range [Tu] |
-40°C...+80°C |
| Connection input/output |
RJ45 shield socket |
| Pinning |
1/2, 3/6, 4/5, 7/8 |
| Mounting on |
35mm DIN rail |
| Enclosure material |
Orange thermoplastic, UL94-V0 |
| Earthing via |
Earthing screw |
| Shield earthing |
Indirectly via integrated spsrk gap |
| Dimension |
90 x 54 x 63 (mm) |
| Test standards |
IEC 61643-21; EN 61643-21; GB 18802.21 |
| Certification |
CE, RoHS, ISO9001:2015 |
| Ordering information |
|
| Type |
BS RJ45 G48(A) |
| Art.-No. |
630 014 |
| Packing unit |
1pc(s) |
Summary
BS RJ45G 48(A)(630014) is for installation at LPZ 0B-2 or higher, directly installed in the front near the equipment; according to IEC standard for CAT6 or IEEE 802.3at or Class E integrated wiring system; all the industrial Ethernet 10M, 100M, 1Gbit or higher network surge protection; the nominal current, continuous DC high voltage, to support the PoE network with power supply system. This surge protective device use RJ45 interface protected by four pairs lines. Designed according to IEC 61643-21 GB 18801.21.
