Schemc
HQD ATC Spindle 6.5KW Automatic Tool Change Spindle Motor Water-Cooled BT30 GDL120-30-24Z/6.5 CNC Milling Machine Engraving
HQD ATC Spindle 6.5KW Automatic Tool Change Spindle Motor Water-Cooled BT30 GDL120-30-24Z/6.5 CNC Milling Machine Engraving
Regular price
$9,151.90 USD
Regular price
$0.00 USD
Sale price
$9,151.90 USD
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
Product Description
Model: GDL120-30-24Z/6.5
Diameter (mm): 120
Speed regulation mode: The three-phase output inverter can change the spindle speed by changing the frequency of the inverter.
Cooling method: water cooling
Power: 6.5kw
Voltage: 380V
Current: 13.5A
Torque: 2.6Nm
Frequency:800HZ
Speed: 24000RPM
Number of poles: 4P
Phase： 3 phase asynchronous driver
Rotation: Seen from the shaft end, it rotates counterclockwise
Tool handle: BT30 ER32
Pull stud: BT30-45°
Grease lubrication
Main use: Carving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metals.
Diameter (mm): 120
Speed regulation mode: The three-phase output inverter can change the spindle speed by changing the frequency of the inverter.
Cooling method: water cooling
Power: 6.5kw
Voltage: 380V
Current: 13.5A
Torque: 2.6Nm
Frequency:800HZ
Speed: 24000RPM
Number of poles: 4P
Phase： 3 phase asynchronous driver
Rotation: Seen from the shaft end, it rotates counterclockwise
Tool handle: BT30 ER32
Pull stud: BT30-45°
Grease lubrication
Main use: Carving wood, bamboo, ordinary PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metals.
1. Power cord: Three-color wire connects to U, V, W phase/yellow-green wire to ground
Temperature control line: 110℃ thermistor two-phase connected to temperature control protector
2. Cooling inlet: water pump head 8m
3. Knife change and dust removal pressure: 0.2-0.3MPa (6/4 hose)
4. Number of proximity switches: Two NPN (normally open) N.O. for hanging knife and unloading knife.
5,Proximity switch connection: wire to +24VDC, blue wire to OVDC signal load, one end to +24VDC/ the other end to black wire
6. Air seal pressure: 0.1-0.2MPa (4/2 hose)
7. Cooling water: (2 and 6 ends are connected to 8/6 hose)
8. Cylinder intake pressure: 0.65MPa (6/4 hose)
Temperature control line: 110℃ thermistor two-phase connected to temperature control protector
2. Cooling inlet: water pump head 8m
3. Knife change and dust removal pressure: 0.2-0.3MPa (6/4 hose)
4. Number of proximity switches: Two NPN (normally open) N.O. for hanging knife and unloading knife.
5,Proximity switch connection: wire to +24VDC, blue wire to OVDC signal load, one end to +24VDC/ the other end to black wire
6. Air seal pressure: 0.1-0.2MPa (4/2 hose)
7. Cooling water: (2 and 6 ends are connected to 8/6 hose)
8. Cylinder intake pressure: 0.65MPa (6/4 hose)
●The working environment temperature of the spindle is usually -10~40.
●Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
●Before installing the first electric spindle to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular joint bearings can extend the life of the spindle.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. Bearings are resistant to high temperature and low heat
3. The ball bearing has low friction, low noise and long service life.
The longer the length, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
The accuracy is 0.01mm, and the coaxial cable is less than 0.0025mm
1. Our main shaft uses 4 bearings.
2. Bearings are resistant to high temperature and low heat
3. The ball bearing has low friction, low noise and long service life.
●The water-cooled spindle must be used together with the water pump. Otherwise, the spindle will quickly break.
●The AC spindle motor must be used together with the inverter. The power of the inverter needs to be equal to or greater than the power of the spindle. Before use, please set the inverter parameters suitable for the spindle. Otherwise, the spindle and inverter will break immediately.
●When using the spindle, the noise is different from before, so please stop the spindle immediately. You need to replace the spindle bearing.
●The AC spindle motor must be used together with the inverter. The power of the inverter needs to be equal to or greater than the power of the spindle. Before use, please set the inverter parameters suitable for the spindle. Otherwise, the spindle and inverter will break immediately.
●When using the spindle, the noise is different from before, so please stop the spindle immediately. You need to replace the spindle bearing.
