Schemc
HQD Water-Cooled Spindle Motor 800W 1.5KW 2.2KW 3.2KW 4.5KW 5.5KW+ Frequency Converter + Fixture + Water Pump For CNC Router
HQD Water-Cooled Spindle Motor 800W 1.5KW 2.2KW 3.2KW 4.5KW 5.5KW+ Frequency Converter + Fixture + Water Pump For CNC Router
Regular price
$1,870.92 USD
Regular price
$0.00 USD
Sale price
$1,870.92 USD
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
●The working environment temperature of the spindle is usually -10~40.
●Before installing the first Spindle motor to rotate the spindle head by hand, you should feel flexibility and no blockage.
●Before installing the first Spindle motor to rotate the spindle head by hand, you should feel flexibility and no blockage.
P4 fully sealed angular knuckle bearings extend spindle life.
The longer the rotor, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
1. Our spindle uses 4 bearings.
2. Bearing resistance to high temperature and low heat
3. Ball bearing has low friction, low noise and long service life.
The longer the rotor, the greater the torque and the greater the power.
Careful assembly makes the spindle more precise.
1. Our spindle uses 4 bearings.
2. Bearing resistance to high temperature and low heat
3. Ball bearing has low friction, low noise and long service life.
◆ Two speed control modes: V / F control, Vector control, torque control
◆ No PG vector control (SVC): starting torque 0.5Hz up to 150%
◆ 8-stage simple PLC function, multi-speed control and pid regulation
◆ Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
◆ I / O terminals can be freely programmed to combine multiple working modes according to user needs.
◆ With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and
reliable.
◆ With instantaneous power-down retention function, it can avoid the impact of production due to instantaneous power failure
◆ With over torque and under torque detection
◆ Automatic voltage adjustment function to effectively solve the low frequency vibration problem of high power motor
◆ Offer a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal
real-time monitoring and protection to ensure safe operation
◆ Built-in reactor with inverter above 37kW, which improves the power factor of the input side and improves the efficiency and
stability of the whole machine.
◆ 0.75 ~ 15kW built-in braking unit.
◆ No PG vector control (SVC): starting torque 0.5Hz up to 150%
◆ 8-stage simple PLC function, multi-speed control and pid regulation
◆ Support multiple frequency settings: digital setting, analog setting, PID setting, RS485 communication setting
◆ I / O terminals can be freely programmed to combine multiple working modes according to user needs.
◆ With jump frequency control function, it can effectively suppress mechanical resonance and make the system more stable and
reliable.
◆ With instantaneous power-down retention function, it can avoid the impact of production due to instantaneous power failure
◆ With over torque and under torque detection
◆ Automatic voltage adjustment function to effectively solve the low frequency vibration problem of high power motor
◆ Offer a variety of fault protection functions: over-current, over-voltage, under-voltage, over-heat, overload, lack of equal
real-time monitoring and protection to ensure safe operation
◆ Built-in reactor with inverter above 37kW, which improves the power factor of the input side and improves the efficiency and
stability of the whole machine.
◆ 0.75 ~ 15kW built-in braking unit.
Application
Winding machine, mixer, extruder, slitter, winder, compressor, fan, pump, grinder, conveyor, elevator, centrifuger and other speed control machines
Press "ESC" to enter the parameter setting state. If you press and hold "ESC" for more than 3 seconds and then release, you canonly display and modify the factory value parameters when entering the special mode.
When setting parameters again, just hold down the ESC key to exit the parameter setting state and return to the standby mode.
When setting parameters again, just hold down the ESC key to exit the parameter setting state and return to the standby mode.
Water pump and spindle corresponding table
The greater the pump head, the greater the flow, the faster the circulation speed. So choose a relatively large pump, the effectis better. In addition, the effect of the pump is also affected by the use of the environment, and the main shaft blockage will also affect the effect!
Advantage
High lift
Mass flow
Highly durable
Good insulation
Can quickly cool the spindle motor
Good quality, long life
Large inventory
Great power
The shell is made of high-quality plastic, corrosion resistance, high durability.
Because the motor is completely sealed, the pump has excellent insulation properties.
Must be used in water.
Once the product does not work properly, the power supply must be cut off and it must be maintained after being lifted from the
water.
Mass flow
Highly durable
Good insulation
Can quickly cool the spindle motor
Good quality, long life
Large inventory
Great power
The shell is made of high-quality plastic, corrosion resistance, high durability.
Because the motor is completely sealed, the pump has excellent insulation properties.
Must be used in water.
Once the product does not work properly, the power supply must be cut off and it must be maintained after being lifted from the
water.
Features
Cast aluminum fixtures are high-quality aluminum cast by a special manufacturing process. Compared with ordinary aluminum, this product has the characteristics of toughness, strong impact resistance, high hardness and strong oxidation resistance.
Product Description
Compared with aluminum profile clamps, it has higher precision and is not easy to deform.
The inner wall is smooth, and the outer wall is sandblasted, which is fine and uniform, but not very smooth.
Cast aluminum fixtures are much heavier than aluminum profile fixtures.
The inner wall is smooth, and the outer wall is sandblasted, which is fine and uniform, but not very smooth.
Cast aluminum fixtures are much heavier than aluminum profile fixtures.
Usage
The cast aluminum fixture is mainly used to fix the auxiliary product, thus ensuring the verticality of the auxiliary product and the balance piece, improving the operation accuracy of the auxiliary product, reducing the noise and reducing the accumulated error.
This product uses a thickened outer sheath made of new materials, which is green and environmentally friendly, waterproof,oil-proof, folding-resistant, wear-resistant, and has a long service life.
Jinan Hongyang CNC Machinery Co., Ltd. was established in 2008. There are more than 100 employees, and the inventory area is 10,000 square meters. It is mainly engaged in engraving machine parts, including spindle motor, frequency converter, stepper motor, drive, hybrid servo motor, servo motor, Richauto dsp series controller, weihong or nc studio controller, spindle cooling water pump, lubricating oil pump, tool sensor, Limit sensors, water-cooled vacuum pumps, air-cooled vacuum pumps, power supplies, transformers, gear boxes, racks, rails, sliders or blocks, ISO30 tool clips, cable chains, spindle dust covers, vacuum cleaners and other engraving machine accessories, welcome your For inquiries.
