Schemc
HYCNC HQD 2.2kw Water Coolded Spindle Cnc Router Spindle Motor Wood Cut 85mm Diameter Engraving Milling Woodworking Motor
HYCNC HQD 2.2kw Water Coolded Spindle Cnc Router Spindle Motor Wood Cut 85mm Diameter Engraving Milling Woodworking Motor
Regular price
$575.80 USD
Regular price
$0.00 USD
Sale price
$575.80 USD
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
Product Description
HQD 2.2KW 85mmX225mm water cooled spindle motor
1.Size: 85mmX225mm
2.Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
3.Cooling: Water cooling
4.Power: 2.2kw
5.Voltage: 220v/380v
6.Frequency: 400Hz
7.Rotating speed:24000r/min
8.Water Cooling ER20 collet chunk
9.Carving for wood, ordinary PCB, PVC, PMMA, plastic, two-color board and other non-metal
3.Cooling: Water cooling
4.Power: 2.2kw
5.Voltage: 220v/380v
6.Frequency: 400Hz
7.Rotating speed:24000r/min
8.Water Cooling ER20 collet chunk
9.Carving for wood, ordinary PCB, PVC, PMMA, plastic, two-color board and other non-metal
The figure above is a schematic diagram of the wiring between the main shaft motor aviation plug and the inverter .
1.Inverter UVW corresponding plug 1, 2, 3 (UVW and 123 wiring in no particular order)
2.Note: After turning on the power, please let the group motor idling for a few seconds. If the motor reverses, please swap line 1 and line 3
1.Inverter UVW corresponding plug 1, 2, 3 (UVW and 123 wiring in no particular order)
2.Note: After turning on the power, please let the group motor idling for a few seconds. If the motor reverses, please swap line 1 and line 3
1.HQD spindles all use P4 grade series bearings , compared with P5 bearings , its with higher precision .
2.All P4 and RZ series , and its dust proof , and longer service life .
3.Excellent quality rotary , making spindle more powerful .
Motor starts to run, while it won't rotate or get stuck or very low speed ?
During spindle in stock period or when transportation, grease inside the bearings state will change, users should running at low speed for 1-2 hours. Run 30 minutes each 6000 rpm and then then 12000rpm , 18000rpm , 24000rpm . Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter. Must avoid directly connect spindle motor with 220v or 380v electricity.
Connection for spindle and inverter ?
inverter have U ,V , W , and spindle have pin 1 , 2,3,4 , 220v or 380v after connect with vfd , then inverter power cord should be welding like this : 1+U , 2+V , 3+W ,and spindle port 4 with the ground line . After the power on, to check whether the spindle rotation axis is same with indicated direction or not , If direction is on the contrary , please immediately turn off , replace the inverter and spindle connected two wires randomly .
Spindle cooled daily maintenance ?
every day before using ,spindle must start at low speed at 15-20 mintues. And the cooling system is working properly, for water pump to confirm pump inside the water , and for water chiller , sure cooling ability .
2.All P4 and RZ series , and its dust proof , and longer service life .
3.Excellent quality rotary , making spindle more powerful .
Motor starts to run, while it won't rotate or get stuck or very low speed ?
During spindle in stock period or when transportation, grease inside the bearings state will change, users should running at low speed for 1-2 hours. Run 30 minutes each 6000 rpm and then then 12000rpm , 18000rpm , 24000rpm . Spindle and the inverter should be working together. The inverter's specifications and parameter settings need match spindles parameter. Must avoid directly connect spindle motor with 220v or 380v electricity.
Connection for spindle and inverter ?
inverter have U ,V , W , and spindle have pin 1 , 2,3,4 , 220v or 380v after connect with vfd , then inverter power cord should be welding like this : 1+U , 2+V , 3+W ,and spindle port 4 with the ground line . After the power on, to check whether the spindle rotation axis is same with indicated direction or not , If direction is on the contrary , please immediately turn off , replace the inverter and spindle connected two wires randomly .
Spindle cooled daily maintenance ?
every day before using ,spindle must start at low speed at 15-20 mintues. And the cooling system is working properly, for water pump to confirm pump inside the water , and for water chiller , sure cooling ability .
