Schemc
New Original Factory Direct Selling Hqd 4.5 Kw Atc Spindle Iso30 Motor Automatic Tool Changer 24000rpm 18000 Rpm 220v 380v
New Original Factory Direct Selling Hqd 4.5 Kw Atc Spindle Iso30 Motor Automatic Tool Changer 24000rpm 18000 Rpm 220v 380v
Regular price
$3,292.91 USD
Regular price
$0.00 USD
Sale price
$3,292.91 USD
Unit price
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
1 and 220v 380v 6.0kw air-cooled spindle motor ceramic ball bearing
Main Application: Engrave for wood,bamboo,normal PCB,PVC, PM-MA,plastic,duotone board(ABS)and etc nonmetal, also can engraveon gold,silver,copper, aluminium,Pb etc soft metal surface working.
1. Our ceramic ball bearing spindle uses 4 ceramic ball bearings.
2. Ceramic ball bearings are resistant to high temperature and low heat, and are usually 3-5 degrees lower than steel ball
bearings during use.
3. Ceramic ball bearings have low friction, low noise and long service life.
4. If the spindle is to be used for aluminum or hardwood, ceramic ball bearings are better than steel ball bearings.
2. Ceramic ball bearings are resistant to high temperature and low heat, and are usually 3-5 degrees lower than steel ball
bearings during use.
3. Ceramic ball bearings have low friction, low noise and long service life.
4. If the spindle is to be used for aluminum or hardwood, ceramic ball bearings are better than steel ball bearings.
During the storage and transportation of the spindle, the state of the high-speed grease inside the bearing will change, and the customer should run it at a low speed for 30 minutes. Then slowly increase at 3000 rpm, running for 20 minutes each time. The spindle and inverter should work together. The specifications and parameter settings of the inverter need to match the spindle parameters. (Because the high-speed grease inside the bearing changes, the sound may not sound normal when you get the spindle. Please run it for 30 minutes or more, the sound will be normal.)
Connect the main shaft of the inverter. The power cord of the three-phase inverter should be welded to the 1 (U), 2 (V), 3 (W) and 4 pins of the plug. After turning on the power, observe whether the spindle axis of rotation is consistent with the direction. If it is inconsistent, turn it off immediately, and replace the two wires of the three-phase power supply connected to the inverter and the spindle.
During normal operation, the air-cooled spindle often generates heat. Please always check whether the air-cooled spindle box and the air duct are blocked by dust. If the dust is blocked, clean it up in time. If it is not cleaned, it is easy to burn the
spindle.
Before using the spindle every day, it must run at low speed for 15-20 minutes. Clamp the tool on the spindle, collet nut, collet, and the tool must be clean enough. The shank inserted into the chuck must be larger than 15mm.
Connect the main shaft of the inverter. The power cord of the three-phase inverter should be welded to the 1 (U), 2 (V), 3 (W) and 4 pins of the plug. After turning on the power, observe whether the spindle axis of rotation is consistent with the direction. If it is inconsistent, turn it off immediately, and replace the two wires of the three-phase power supply connected to the inverter and the spindle.
During normal operation, the air-cooled spindle often generates heat. Please always check whether the air-cooled spindle box and the air duct are blocked by dust. If the dust is blocked, clean it up in time. If it is not cleaned, it is easy to burn the
spindle.
Before using the spindle every day, it must run at low speed for 15-20 minutes. Clamp the tool on the spindle, collet nut, collet, and the tool must be clean enough. The shank inserted into the chuck must be larger than 15mm.
Company information and contact information
Jinan Hongyang CNC Machinery Co., Ltd. was founded in 2008. There are more than 100 employees, and the inventory area is 10,000 square meters. It is mainly used in engraving machine parts, including spindle motor, frequency converter, stepper motor, drive,hybrid servo motor, servo motor, Richauto dsp series controller, Weihong or nc studio controller, spindle cooling water pump,lubricating oil pump, tool sensor, limit sensors , water-cooled vacuum pumps, air-cooled vacuum pumps, power supplies,transformers, gear boxes, racks, rails, sliders or blocks, ISO30 tool clips, cable chains, spindle dust covers, vacuum cleaners and other engraving machine accessories, welcome your for inquiries.
Contact information
Tiny Wechat Whatsapp Cell Phone 8615098715557
Sales@hycncrouter.com
Contact information
Tiny Wechat Whatsapp Cell Phone 8615098715557
Sales@hycncrouter.com
