Richauto A11s A11 0501 0504 A15 A12s A18 Dsp Controller Rich Auto Free Shipping Brand Router Parts Control System

Product Description

What if you want other handles?

                                          Handle                                                         Interface board

        USB communication cable                         50-pin data transmission cable
If you want other accessories?

Product number	RichAuto DSP A11
processor	DSP
Built-in memory	512MB
Display screen	Three-inch monochrome screen
Communication port	U Disk
Number of linkage axes	3 axis
control signal	Differential signal
Drive System	Stepper/Servo Motor
Minimum input unit	0.001mm
Power failure protection function	stand by
Breakpoint processing function	stand by
External power supply voltage	24VDC
Manual mode	Continuous, jog, distance
Interpolation method	Straight line, arc
Maximum pulse frequency	1MHz

Do you want other data?

 

RichAuto control system provide two modes of buttons' operation,including one-touch button & Combination button.

One-touch button: Press one button on handle.

Combination button: Press two buttons at the same time to achieve the operation; theoperation step: press one main function button and meanwhile press a second accessibility button,and then release the two buttons at the same time to realize the combination button operation.

I ist of Combination buttons:

The RichAuto control system takes DSP as the core, and the high-speed computing processing speed is unmatched by the PLC system: embedded structure, high integration, strong stability, easy to install and operate: support U disk, card reader mobile storage , Adopt USB interface communication, fast transmission speed, plug and play fully realize full offline work.

1. Use of this product is strictly prohibited in the strong interference, strong magnetic field environment. Operating ambient temperature 0-70 C, working environment humidity 0-90% (non-condensing).

2. Insert U disk in the correct direction. Do not pull out 50-pin cable when system run.

3. During processing U disk file process, do not pull out the U disk to prevent the interruption of data transmission.

4. Strictly prohibited metal, dust, and other conductive substances enter the controller.

5. The machine shell should connect the ground wire to ensure the safety of the work and to prevent interference.

6.Prohibited unauthorized disassembly, no user-repairable parts..

7. Unused for long periods of time, please pay attention to the power outage, and keep properly.

8. Pay attention to water, dust, fire when using it.

9. Do not use the corrosive chemical solvents to clean the equipment.

10. Spindle motor bearing life and its speed is inversely proportional.

11. Graver is very sharp. Do not touch when it is running in order to avoid injury; Do not use handkerchiefs, scarves to touch it to prevent embroiled damage.

Do you have other questions about this?